EARL'S® POWDER PUTTY

Multi-Purpose Powder Filler
Interior & Exterior

Just mix with water. No waste, no shrinking

Earl’s Powder Putty is a low cost multi-purpose filler for interior or exterior use.

Earl’s Powder Putty is the perfect filler for interior or exterior surfaces such as wood, plasterboard, cement sheeting, concrete, metal etc. Earl’s Powder Putty dries to a hard wearing finish and can be cut, carved, sanded or sawn. Ideal for repairs to timber, woodwork, walls, architectural or hobby moulding. Use as a quick patch to distressed floorboards before laying carpet.

Earl’s Powder Putty is proudly 100% Australian made and 100% Australian owned.

TM_Proudle_Australian_Made_Icon

Perfect for timber, masonry & metal : Earl’s Powder Putty is the perfect filler for interior or exterior surfaces such as wood, plasterboard, cement sheeting, concrete and metal.

Ideal for so many jobs: Use on timber, woodwork, walls and architectural or hobby moulding, windows, flooring, decking etc

Indefinite shelf life: Earl’s Powder Putty has an indefinite shelf life.

Cut, carve, sand or saw it: Earl’s Powder Putty dries to a hardwearing  finish and can be cut, carved, sanded or sawn.

What is required : With Earl’s Powder Putty, you only need to mix enough for your immediate needs, so there is no waste.

Use it for interior or exterior : Earl’s Powder Putty is water resistant, weather resistant when coated but NOT waterproof. If using in an exterior situation ensure base material is stable.

Earl’s Powder Putty is not a  flexible compound and is unsuitable as a filler where there may be structural movement. It is advisable to coat after drying.

Easy to apply

Prepare base material. Restore rotted wood with Earl’s Wood Hardener and remove loose mortar and any contaminants such as oil, flaking paint, dirt, dust or sealant. Mix to required consistency and apply with a putty knife.

Slightly over ll and leave for 30 minutes before scraping o  to level or mould to required shape. For a smooth finish, wipe with a damp sponge and wait 2-3 hours to sand. Apply a primer before painting. Note that Earl’s Powder Putty does not absorb stain or colour as readily as wood, so a few coats may be required. For a thicker putty use less water. Do not apply too much water as it will break down and crack.

For further instructions, please refer to the product label.

What to use Earl’s Powder Putty for: Patching | Masonry Fittings | Rotted Timber | Timber Imperfections

Frequently Asked Questions

Question: Can you change the colour of Earl’s Powder Putty?
Answer: Yes, simply add oxides before mixing with water.

Question: Can I use Earl’s Powder Putty Outdoors?
Answer: Yes, make sure the filler is sealed though or it will be diluted and wash out.