HANDY HINTS
TIMBERMATE can be stained with all types of colorants, e.g. waterbased, oilbased and spirit stains and oxides.
TIMBERMATE can be sealed with all known types of top coats e.g. waterbased Tung oil, single pack and two pack Polyurethane varnishes.
SANDING SEALER: Add approximately 10% - 15% water and mix until desired consistency is achieved.
FILLING LARGER HOLES: Fill in layers approximately 6mm at a time and allow to dry between each application.
COLOURING: TIMBERMATE can be coloured by mixing prior to application or when dried, with all colorants.
STAINING FLOORS: To achieve the best match choose a colour to match floor, sand and stain floor when putty is dry.
DRYING: TIMBERMATE dries in about 30 minutes depending on temperature and depth of fill. TIMBERMATE'S drying time can be reduced by placing heaters and fans in the room.
SANDING: TIMBERMATE is ready to sand when fading of colour occurs
MIXING: In colder climates TIMBERMATE hardens in the tub, to soften simply place in the sun or stand in a tub of hot water. When thinning hot water provides the best results.
CLEANING: Clean tools with water.
