GRAFFITI REMOVAL PRODUCTS
WINNING THE WAR ON GRAFFITI IS EASIER WITH... DEFENSE, ATTACK & OFF.
Graffiti Protection and Removal Systems
Non Toxic, Non Caustic Soda. Easy and safe to use. Australian made. With our graffiti removal system we are able to prevent surfaces from being damaged by graffiti or help remove graffiti after an attack.
Use our Defence/Attack/Off program as a one-stop system. We have the solution - the barrier forms an invisible shield for easy removal. The area can be protected before being targeted. Use our Graffiti protection program on walls, doors, fences etc., or even commercially where buildings are at risk!
1 - BEFORE WE ARE ATTACKED
With the Graffiti Management System, we begin the protection of the surface with GRAFFITI DEFENCE. This is a sacrificial protective barrier coat applied to surfaces that may become the target for GRAFFITI ATTACK. Use sparingly for best results.
Apply GRAFFITI DEFENCE barrier coat liberally to the surface with a roller or brush. One litre should cover approximately six square metres on cement rendered walls. This will be particularly useful as more and more people are moving towards a rendered look.
Your wall, gate garage door, home or factory is now ready for ANY Graffiti attack that may eventuate.
2 - AFTER THE ATTACK
If you have used a Graffiti Defence barrier protected surface (if not, proceed to step 3)
Proceed with the removal of graffiti with Graffiti Attack, an environmentally friendly, non caustic Graffiti Remover that dissolves the graffiti. The dissolved graffiti can be hosed off with water.
Unpainted Surfaces - Using the Graffiti Attack trigger pack, spray directly onto the graffiti, allow approximately 30 seconds for the graffiti to soften. Stubborn areas may require a short scrub with a stiff bristle brush, then simply hose off with water or simply use hot water pressure blasting.Painted Surfaces - Brush or Spray Graffiti Attack directly onto the graffiti, which is then followed by washing with clean water.
Do not allow the Graffiti Attack to dwell on the surface after the graffiti has been dissolved. Wash off immediately to avoid possible softening of the paint surface.
3 - NO DEFENCE - THERE IS HOPE
GRAFFITI OFF is a non-caustic heavy duty graffiti remover, designed for removing graffiti from most surfaces.
The removal of graffiti from unprotected surfaces such as bricks, cement render, timber fences, stone.
Metal would require the following action.
Unpainted Surfaces - Apply heavy duty GRAFFITI OFF REMOVER directly onto graffiti and allow to dissolve, then scrub with a stiff bristle brush and wash off with water. Areas where graffiti is deeply imbedded may require a second application.
Painted Surfaces - Apply to small sections at a time. After the graffiti has dissolved wash the area immediately with water as continued use may dissolve painted surface
DO NOT APPLY GRAFFITI MANAGEMENT SYSTEM TO WET SURFACES
DO NOT APPLY GRAFFITI PRODUCTS IN TEMPERATURES BELOW 7°
When clean protect the surface with GRAFFITI DEFENCE barrier, to allow future attacks to be easily removed.For information on where to use Timbermate Graffiti Management Products, go to the Graffiti Fact Sheet.
